The R11 remote control allows you to control the intensity of your lights remotely.
*To work, you absolutely need a controller plugged to your lights*
Controller specification :
Input Voltage : DC12-24V
Output Voltage : DC12-24V
Max Power Load : 36W
Dimensions : (L)6.5cm x (l)1.4cm x (H)5mm
2x male DC connector + 2x female DC connector (included)
Remote control Specification :
Battery : CR2032 (included)
Range : 30meters
Signal : RF no need to point anything.
Dimensions : (L)13.8cm x (l)3.6cm x (H)1cm
The controllers are compatible with all lights operating at DC12V with a power less than 36Watts.
Advantages of using multiple controllers :
1. Control lights from a different power outlet with the same remote.
2. Distribute the load if the power of lights exceeds 36W.
Ex : 6x SPL8 = 48W > 36W,
distributed in (3x SPL8 = 24W < 36W) x2
(see 3rd image)
The remote control purchased with its controllers is pre-synchronized with them, wich means that it will only be compatible with the latter.
So if you buy another kit, the controller from the 2nd kit will not interfere with your equipment controlled by your remote control from the 1st kit.
Also, if you want two remotes to control the same lights, it is possible to do so.
(you will need to synchronize it using a simple procedure included)